The hot water boiler is a kind of pressureless container, but if there is a problem of valve blockage during use, it may cause the internal pressure of the hot water boiler to rise. When using it, it is necessary to pay attention to the water supply mode, check the internal deposition problem of the boiler and before ignition. Inspection, completely do these three points to ensure that the hot water boiler gas emissions smoothly promote the boiler to operate normally.
Be sure to check before ignition. Before the ignition of the hot water boiler, it is necessary to check every auxiliary equipment of the boiler. In particular, it is necessary to pay attention to whether the valve is open reliably, so as to ensure smooth water circulation inside the boiler and avoid excessive pressure caused by steam blockage. If it is found that the shut-off valve leaks seriously during the inspection, it should be repaired or replaced in time to fail to ignite.
Pay attention to cleaning the water tank debris. The water quality of the hot water boiler is clean and clean, but it may precipitate some debris and water tank during long-term use. If the debris is deposited more, the pump may be damaged and the valve may be blocked. Before using the hot water boiler, it is necessary to check whether there are any achievements in the water tank in time to clean up, so that the heating effect can be better, and the internal temperature of the boiler is too high and the pressure is high.
