Hot water boilers are widely used in schools, hospitals, textiles, hotels, restaurants, bathrooms, etc. They are mainly distributed in densely populated areas and must be installed as required. In order to avoid hidden dangers, a safety accident is caused.
(1) Location of hot water boiler:The boiler must be placed in a reasonable position and must not be installed in a basement where the air is not clear. The boiler must be flattened to avoid vibration during operation. The function of the gas boiler ignition system is to ignite the mixture of air and fuel. The main components are: ignition transformer, ignition electrode, electric high voltage cable. A safer ignition system is called an electronic pulse igniter, which is widely used by gas boiler manufacturers such as Zhuoyi Energy Saving. It is convenient and time-saving, just press with a finger, and the safety is high, there will be no safety accident due to accidental flameout. Once the flameout state occurs, the control system can close the solenoid valve in time and shut off the gas passage. Causes equipment damage.
2. Professional installers:
In order to ensure the safe use of the boiler, the boiler installation must be carried out by a professional installer with expertise and installation experience. The gas-fired steam boiler adopts the combustion machine under-position mode, the two-pass structure, the fuel combustion is sufficient, the boiler runs stably and takes up less space, and the smoke pipe is inserted with the spoiler to slow the smoke exhausting speed, increase the heat exchange amount, and the boiler thermal efficiency is high and lower. The user’s use cost gas hot water boiler has the remarkable characteristics of environmental protection, energy saving, safety and fully automatic operation. It is very convenient to use. In addition, due to the economic operation and government policies, gas-fired hot water boilers are more and more popular. This is the primary condition for ensuring the safe operation of the boiler.
Third, check for leaks: When installing a gas boiler, open the gas valve to see if there is a leak, if there is no source of ignition nearby. If there is no air leakage, the installation is completed. If there is any air leakage, it should be investigated and resolved in time. Installation of the pipe: The hot water boiler flue is an exhaust system that emits flue gas. The exhaust gas will pollute the surrounding environment and the installation of the flue must extend outward. And there is a certain slope to slope downwards to prevent the condensate from flowing back, causing corrosion of the furnace. In addition, hot water boiler experts warn that in order to prevent unnecessary safety hazards, flammable substances should not be placed around the pipe.
