1. How to connect the make-up pipe in atmospheric hot water boiler?
There are many ways to connect the water supply pipe in the atmospheric hot water boiler. Generally speaking, it will be equipped with an expansion water tank, so the water supply pipe can enter the water tank from the upper part of the water tank, the water supply pipe can be connected to the suction pipe of the circulation pump, or the on-off valve that connects the water supply pipe to the return water. Behind. Which method is chosen is determined by the actual situation and the requirements of the boiler.
2. What is the boiler tonnage of hot water boilers used in large bathing centers?
The tonnage of hot water boilers used in large bathing centers is determined by the actual water consumption. In addition, this can avoid the waste of boiler use, or the boiler can not meet the use requirements. Generally, a 0.5 ton hot water boiler or a 2 ton hot water boiler will be used.
3. What is the physical difference between a hot water boiler and a steam boiler? Which one has higher requirements for water quality?
The physical distinction between hot water boilers and steam boilers is mainly based on the following two aspects. One is the thickness of the steel plate. The thickness of the steel plate of the hot water boiler is smaller than that of the steam boiler. The second is to see if there is a steam-water separator in the boiler drum, in some cases it is a steam boiler, otherwise it is a hot water boiler. In terms of water quality requirements, the steam boiler is higher.
4. How about a vacuum hot water boiler?
A vacuum hot water boiler is a specific type of hot water boiler, and it has its own characteristics, so it cannot be said that this kind of hot water boiler is good or bad, but only under what circumstances is it appropriate to use this type of boiler. In addition, we also need to know that after the design of the vacuum hot water boiler, the drawings cannot be changed at will to prevent problems in the manufacturing and use process.
