When the exhaust valve on the steam drum is full of steam, turn on the main power to start the burner, close and check the boiler inlet, hand hole flange and valve, when the air pressure rises to 0.05~0.1 Mpa, add water, drain, and check the experimental water supply system and sewer equipment.
The hot water boiler is equipped with a computerized boiling water boiler controller, and all functions are stored on a smart chip, which realizes the intelligentization, digitization, automation and humanization of the boiler. The boiler intelligently controls the water temperature and automatically stops heating when the water temperature is reached; large screen fonts The water temperature is displayed and the boiler water temperature is clear at a glance.
The function of the ignition system of a gas hot water boiler is to ignite the mixture of air and fuel. Its main components are: ignition transformer, ignition electrode, and electric high-voltage cable.
A safer ignition system is called electronic pulse igniter, which is widely used by gas boiler manufacturers. It is convenient and time-saving. It only needs to be pressed with a finger, and has high safety. There will be no safety accidents due to accidental flameout. Once the flameout occurs, the control system can close the solenoid valve and shut off the gas passage in time.
