The tube is assembled into a computerized hot water boiler controller. All functions are stored on the smart chip, which realizes the intelligent, digital, automatic and humanized boiler, and realizes the intelligent control of the boiler water temperature.
The steam boiler is an energy conversion device. The energy input to the boiler is in the form of chemical energy in the fuel, electric energy, heat energy of high-temperature flue gas, etc., and is converted by the boiler to output steam, high temperature water or organic heat having a certain heat energy. Carrier. The function of the gas boiler ignition system is to ignite the mixture of air and fuel. The main components are: ignition transformer, ignition electrode, electric high voltage cable.
A safer ignition system is called an electronic pulse igniter, which is widely used by gas boiler manufacturers such as Zhuoyi Energy Saving. It is convenient and time-saving, just press with a finger, and the safety is high, there will be no safety accident due to accidental flameout. Once the flameout state occurs, the control system can close the solenoid valve in time and shut off the gas passage. The hot water boiler is equipped with a computerized boiling water boiler controller.
All functions are stored on a smart chip, which realizes the intelligent, digital, automatic and humanized boiler. The boiler intelligently controls the water temperature and reaches the water temperature heating to stop automatically. The water temperature is displayed and the temperature of the furnace water is clear at a glance. The water temperature heating is automatically stopped; the large font on the screen shows the water temperature, and the water temperature in the furnace is clear at a glance. 2. The temperature of the furnace water can be arbitrarily set at 10 ° C ~ 10 0 ° C. The boiler not only provides hot water for bathing, but also provides boiled water for use in both the hearth and the hearth. 3. The top of the furnace body is provided with a venting port. The boiler is in a non-pressure state and there is no danger of explosion.
The whole machine is equipped with overheat protection at the same time (when the water temperature in the furnace is high, the heating pipe automatically stops working and a buzzer sounds). Secondary overheat protection (automatically cut off the secondary circuit when the furnace temperature exceeds 10 5 °C) to prevent dry burning and water shortage protection (when the furnace water is lower than the extremely low water level, the secondary circuit is at a temperature of 10 5 °C in the furnace shell) Automatically cut off), when the furnace water is lower than the extremely low water level, the secondary circuit is automatically cut off, the boiler stops working and the buzzer alarm is issued) and other safety protection measures.
Most of these hot water boilers are converted from early steam boilers, and their pot water belongs to the natural circulation inside the boiler. In order to ensure the safety and reliability of the boiler water circulation, the boiler is required to have a certain height, so the volume of the boiler is large, and the steel consumption and cost are relatively increased.
