Large-scale circulating fluidized bed hot water boiler manufacturer–The circulating fluidized bed hot water boiler produced by zozen boiler includes 58MW circulating fluidized bed hot water boiler, 91MW circulating fluidized bed hot water boiler, and 116MW circulating fluidized bed hot water boiler. Product features are as follows:
1. Power saving: The fan power saving can reach more than 30%
Low bed pressure operation, the pressure of the boiler primary and secondary fans, roots fans, induced draft fans is reduced, and the power consumption of the fans is reduced.
2. Coal saving: boiler saves 3 to 5% of coal
Low bed pressure operation, the back pressure in the furnace is reduced, the material concentration in the secondary air area is reduced, the secondary air penetration disturbance effect is enhanced, and the combustion efficiency is improved.
3. Low wear: There is almost no wear on the heating surface, and the annual operating hours can reach more than 8000 hours
Low bed pressure operation, low flue gas flow rate, small material concentration in the furnace, light wear, and long operating cycle.
4.Low-resistance, dust-free bell-hood hood
The bell-hood hood adopts the unique anti-wear technology, which has low resistance to the uniform air distribution and does not wear. Completely solve the problem of dusting of the hood and ensure the combustion efficiency of the boiler.
5.High flow rate and low power consumption
Using a high-flow, low-resistance anti-feeding device can choose a smaller electric power Roots fan, which can ensure the safe and reliable operation of the cycle while saving power for customers.
6, low resistance, high efficiency cyclone separator
A new generation of ultra-efficient cyclone separator with improved technology, the d50 value is 12 microns, and the d99 value reaches 100 microns. The separation efficiency exceeds 99.6%, and the total resistance is less than 1100pa.
的 The circulating combustion system consisting of a furnace bell bell hood, an ultra-efficient cyclone separator and an anti-feeding device can achieve a reliable operation of the wind pressure of 6-8KPa in the air chamber, saving customers more than 30% of power consumption. In the low-chamber air pressure operating state, it can save more than 5% of power consumption.
